Aquaponics
is an interesting concept, I never thought you could grow a garden with
fish, but the popularity of this method is increasing rapidly. But what is Aquaponics and what are the benefits of having one? These questions can be answered below.
What is Aquaponics?
The definition of aquaponics is a system of using fish and plants to produce an aquaponic garden. By using fish waste, it provides a source of organic food for plants, and plants filter water naturally. This
concept is not new in Eastern civilization, since they have been doing
it for hundreds of years with rice, but the idea is relatively new in
the west. This is for people looking to grow their own natural vegetables in their yard or garden. A great alternative!
Benefits of aquaponics
1. Endless supply of vegetables and organic fish
First of all, you will have at your disposal a large quantity of organic food. Here are some examples of what you can grow in your Aquaponic Garden:
cucumbers
tomatoes
Lettuce
peas
beans
Broccoli
Various herbs like basil and parsley and the list goes on ...
2. No more annoying pulling weeds
I swear it's the best part, how many times has someone tore the weeds
by breaking his back just to see that they come back a few days later?
3. Can grow ten times more with less space than with traditional gardening
You get more performance, is it good? Especially if you have a small patio, you will have a sufficient
supply of fresh vegetables more than you would with traditional
gardening.
4. It is virtually automated
You do not need to spend as much time as you would with a traditional
garden, just curl up and supervise and let the fish do all the work for
you.
5. You do not have to worry about fertilizing it
It is always difficult to maintain balance when fertilizing your garden in a traditional environment. You
can make or break your garden, and of course, you have to deal with
insects that invade our traditional plants and that are really difficult
to control. Then, at that time, many people use pesticides to get rid of parasites that are toxic and harmful to ingestion.
6. Easy to build
The materials are easy to find and the material, and it is quite easy to set up and, if necessary, easy to disassemble to move.
7. It's profitable
You will have an abundance of vegetables and fish that would cost you hundreds or thousands of dollars. You'll save a ton of money instead of going to the grocery store.
As
you can see, there are great benefits to adding an Aquaponic system
because it can produce and produce a large amount of vegetables and
plants for your garden, and save you a lot of money. There
is not much effort involved and once fully configured you will have a
stand-alone aquaponic garden without chemicals that you and your family
can enjoy.
http://www.annonces.immo-reve.com/
https://www.facebook.com/immo.reve.tn
Are 3D Floor Plans Better Than 2D Floor Plans?
Floor plans have many advantages. For example, they offer beautiful designs and sizes to suit your desired designs. In fact, these floor plans are colorful and show beautiful pictorial illustrations. You can create these shots in many formats, such as DWG, TIF, WMF, and JPEG, to name a few. In addition, you can do them in 3D or 2D according to the desired results. Hand drawn sketches are easy to convert to 2D and 3D format. If you want to know the difference between 2D and 3D floor plans, you can read.
Technical difference
In 2D floor plans, you, the designer, work on both the y-axis and the x-axis. In addition, the design can be changed on the upper, lower, right and left sides. On the other hand, 2D plans are much simpler and relatively inexpensive. They can be used to display the right, the top and the front of the object.
Unlike 2D, designers work on three models to create 3D floor plans. In fact, it's like molding an object that looks the same, regardless of the angle at which you look at it. With 3D technology, solid models and wireframes are created line by line.
Other differences
Let's read other things that differentiate 2D designs from 3D designs.
affordability
When it comes to cost, 2D plans are cheap. But if you're looking for quality, we suggest you spend a little more and choose 3D plans.
Quality
When it comes to quality, nothing can beat 3D. With 3D technology, expert designers add furniture to enhance appearance. As a result, they can produce realistic designs. The best of 3D is that they can create 360-degree tours, virtual tours and complete views.
Flexibility
When it comes to flexibility, 3D services are the way to go. 2D models can be used to create 3D models. For the final model, a high resolution can be achieved.
interactivity
For a better user experience, the 3D floor can include many animated options. On the other hand, 2D plans may not offer as many options. Apart from this, the 3D planes give the viewer control so that they can rotate the design and check the structure from different angles. In addition, the designs allow the user to press a button for the furniture to appear or disappear inside the rooms.
With innovative floor plans, you can promote your property without any problem, which helps you generate leads. So when you choose between 2D and 3D, we suggest you consider your needs and the benefits of each option.
To sum up, we can say that 3D floor plans are much better than traditional 2D plans. But when making your choice, we suggest that you consider your needs and requirements. Do not just make your decision based on the price, because it's not worth it and you'll regret your decision in the future.
http://www.annonces.immo-reve.com/
https://www.facebook.com/immo.reve.tn
Technical difference
In 2D floor plans, you, the designer, work on both the y-axis and the x-axis. In addition, the design can be changed on the upper, lower, right and left sides. On the other hand, 2D plans are much simpler and relatively inexpensive. They can be used to display the right, the top and the front of the object.
Unlike 2D, designers work on three models to create 3D floor plans. In fact, it's like molding an object that looks the same, regardless of the angle at which you look at it. With 3D technology, solid models and wireframes are created line by line.
Other differences
Let's read other things that differentiate 2D designs from 3D designs.
affordability
When it comes to cost, 2D plans are cheap. But if you're looking for quality, we suggest you spend a little more and choose 3D plans.
Quality
When it comes to quality, nothing can beat 3D. With 3D technology, expert designers add furniture to enhance appearance. As a result, they can produce realistic designs. The best of 3D is that they can create 360-degree tours, virtual tours and complete views.
Flexibility
When it comes to flexibility, 3D services are the way to go. 2D models can be used to create 3D models. For the final model, a high resolution can be achieved.
interactivity
For a better user experience, the 3D floor can include many animated options. On the other hand, 2D plans may not offer as many options. Apart from this, the 3D planes give the viewer control so that they can rotate the design and check the structure from different angles. In addition, the designs allow the user to press a button for the furniture to appear or disappear inside the rooms.
With innovative floor plans, you can promote your property without any problem, which helps you generate leads. So when you choose between 2D and 3D, we suggest you consider your needs and the benefits of each option.
To sum up, we can say that 3D floor plans are much better than traditional 2D plans. But when making your choice, we suggest that you consider your needs and requirements. Do not just make your decision based on the price, because it's not worth it and you'll regret your decision in the future.
http://www.annonces.immo-reve.com/
https://www.facebook.com/immo.reve.tn
4 Cheap Painting Projects For The Fall
Do you want to give a facelift to your home? I mean, the seasons are changing and we will soon be spending more time indoors than outdoors. So why not spend some time renovating the interior of your home? The only problem with autumn is that we usually save for the Christmas season and we are all in pinch mode. We do not want you to break the bank to repair your house, so we'll share some cheap and easy DIY projects this fall.
Painting is a simple and super simple way to add color and renew the style of antique furniture or decorations. Now, I know that many of you are saying, "Well, I do not know how to paint well." Do not worry, we'll soon be creating a publication on tips for painting anything. For now, do not forget that a small ribbon and a little paint can be very useful. So be comfortable explaining the four simple DIY painting projects to give new life to your home.
The first easy project is to paint all your old frames. It's quick and easy with a little spray paint and newspaper. This can and will give your old executives a new light and a new life. You can paint them to really add contrast or to complement your current decorating styles. If you like more the rustic look, you can even sand a little paint to give it a worn and recovered look.
If you still have money, or if you do not want to paint your frames. Take paint and paint the ceiling of your kitchen, bedroom or bathroom to add depth and color to pieces of one color that would otherwise be bland. Painting the ceiling can help with the distribution of light, especially if the walls are darker than the ceiling. It can also be a way to add a touch of color to a room.
You may have a worn floor that you would like to replace, but you can not afford it now. An easy solution is to paint it. Tape and take a fun color and start painting. You can make drawings on the floor by placing the ribbon in a checkered design or you may just want a simple white or brown. Everything depends on you. This is your house and your style.
The last thing you could do is paint the upper cabinets in your kitchen. This will add a good contrast between the lower cabinets and the upper cabinets. It will also add color to your kitchen. The best part is that it does not take much time because you will not need to move the devices and it will take you half the time because there are always fewer cabinets than the lower cabinets.
All of this can be done easily during the weekend and then you can enjoy your new face wash. Have fun repairing your home and adding color and style. Your home is your domain and should reflect who you are. Have fun painting!
http://www.annonces.immo-reve.com/
https://www.facebook.com/immo.reve.tn
Painting is a simple and super simple way to add color and renew the style of antique furniture or decorations. Now, I know that many of you are saying, "Well, I do not know how to paint well." Do not worry, we'll soon be creating a publication on tips for painting anything. For now, do not forget that a small ribbon and a little paint can be very useful. So be comfortable explaining the four simple DIY painting projects to give new life to your home.
The first easy project is to paint all your old frames. It's quick and easy with a little spray paint and newspaper. This can and will give your old executives a new light and a new life. You can paint them to really add contrast or to complement your current decorating styles. If you like more the rustic look, you can even sand a little paint to give it a worn and recovered look.
If you still have money, or if you do not want to paint your frames. Take paint and paint the ceiling of your kitchen, bedroom or bathroom to add depth and color to pieces of one color that would otherwise be bland. Painting the ceiling can help with the distribution of light, especially if the walls are darker than the ceiling. It can also be a way to add a touch of color to a room.
You may have a worn floor that you would like to replace, but you can not afford it now. An easy solution is to paint it. Tape and take a fun color and start painting. You can make drawings on the floor by placing the ribbon in a checkered design or you may just want a simple white or brown. Everything depends on you. This is your house and your style.
The last thing you could do is paint the upper cabinets in your kitchen. This will add a good contrast between the lower cabinets and the upper cabinets. It will also add color to your kitchen. The best part is that it does not take much time because you will not need to move the devices and it will take you half the time because there are always fewer cabinets than the lower cabinets.
All of this can be done easily during the weekend and then you can enjoy your new face wash. Have fun repairing your home and adding color and style. Your home is your domain and should reflect who you are. Have fun painting!
http://www.annonces.immo-reve.com/
https://www.facebook.com/immo.reve.tn
When Doing Plumbing Repair Yourself Will Cost You - And When It Will Save You
Becoming a homeowner for the first time is a great experience. It's
one of those times when you can be happy to make an important decision
about life and appreciate all the options you can take regarding home
decor, garden design, buying appliances and more. However, not everything is complete with rainbows and roses. With each house comes maintenance, upkeep and possibly repairs. A great skill to learn is when to repair oneself and when to call professionals. Here are some tips for knowing when to repair the hose itself and when you will back it up.
Repair and DIY
Not all problems require professional service programming and staying at home is very good. The waiters are the door. There are many things you can do yourself by reading a book, following an online video, or solving problems. Here are some things that can save you money:
1. Unblock
Kitchen disposal can get stuck very often if some items are not thrown in the trash first. Fibrous fruits and vegetable skins should never be thrown into sewers. They use blades and motors and can cause a jam. If this happens, be sure to unplug the unit and use the supplied tool to clear the jam.
Clogged drains
Clogged drains can usually be easily secured with the right tools. A snake can be used to hide in the obstruction, even if it's inside the pipes, to dislodge it and remove it. To avoid future jams, be sure to use a strainer in the tub and sinks to collect debris and hair. Never throw carbohydrates or fat in the kitchen sink or sink - they can expand in the tubing and cause significant blockage.
3. Bathrooms
Sometimes the floating float in the toilet tank needs to be adjusted so that the toilet runs continuously. You can repair or buy new parts to solve this problem or even adjust the length of the components so that everything works correctly again. Some problems may include closing the water supply at the nearby shut-off valve, usually next to the toilet.
In these cases, the repairs are simple and can save you money by repairing them yourself. In other cases, it is likely that a professional is needed and, in fact, it can save you money by avoiding additional damage and saving you time.
1. Problems of the septic tank
If your septic system is not working well, call a professional immediately. These problems can sometimes make a house uninhabitable and often require excavation work, which requires knowledge of sewer lines, power lines and sometimes even permits.
2. Clogged sewer lines
Any problem with the main sewer line will also require specialized knowledge to solve the problem. If you have leaks, return drains, overflow problems with the drain pump, or any other problem with the main drain line, it is recommended that you obtain a professional inspection before starting any plan.
Know when to save money on a DIY job and know when to call professionals to ensure your home stays in top shape at a reasonable price.
http://www.annonces.immo-reve.com/
https://www.facebook.com/immo.reve.tn
Repair and DIY
Not all problems require professional service programming and staying at home is very good. The waiters are the door. There are many things you can do yourself by reading a book, following an online video, or solving problems. Here are some things that can save you money:
1. Unblock
Kitchen disposal can get stuck very often if some items are not thrown in the trash first. Fibrous fruits and vegetable skins should never be thrown into sewers. They use blades and motors and can cause a jam. If this happens, be sure to unplug the unit and use the supplied tool to clear the jam.
Clogged drains
Clogged drains can usually be easily secured with the right tools. A snake can be used to hide in the obstruction, even if it's inside the pipes, to dislodge it and remove it. To avoid future jams, be sure to use a strainer in the tub and sinks to collect debris and hair. Never throw carbohydrates or fat in the kitchen sink or sink - they can expand in the tubing and cause significant blockage.
3. Bathrooms
Sometimes the floating float in the toilet tank needs to be adjusted so that the toilet runs continuously. You can repair or buy new parts to solve this problem or even adjust the length of the components so that everything works correctly again. Some problems may include closing the water supply at the nearby shut-off valve, usually next to the toilet.
In these cases, the repairs are simple and can save you money by repairing them yourself. In other cases, it is likely that a professional is needed and, in fact, it can save you money by avoiding additional damage and saving you time.
1. Problems of the septic tank
If your septic system is not working well, call a professional immediately. These problems can sometimes make a house uninhabitable and often require excavation work, which requires knowledge of sewer lines, power lines and sometimes even permits.
2. Clogged sewer lines
Any problem with the main sewer line will also require specialized knowledge to solve the problem. If you have leaks, return drains, overflow problems with the drain pump, or any other problem with the main drain line, it is recommended that you obtain a professional inspection before starting any plan.
Know when to save money on a DIY job and know when to call professionals to ensure your home stays in top shape at a reasonable price.
http://www.annonces.immo-reve.com/
https://www.facebook.com/immo.reve.tn
LPG Gas Safety Advice
Living in a rural area has its advantages, such as the freedom of the
countryside and the wild animals that roam, although the disadvantages
are generally, there is no supply of natural gas to your home.
About 80% of households in England are connected to the natural gas supply network, the remaining 20% use oil or LPG to cook and heat their homes.
If you are one of the lucky people living in the countryside, you will know if you want to cook on gas, the only way would be to install LPG.
This normally consists of 2 LPG cylinders, a change in the valve to which the bottles are connected, and a kitchen appliance that has been converted to LPG.
You could even run your LPG central heating system, the settings would be a little different but basically the same.
LPG (Liquefied Petroleum Gas) is like natural gas, the only difference is that it stores the gas in the garden in bottles or in a storage tank.
LPG gas safety is as important as natural gas.
Always inspect and maintain all your gas appliances at least once a year by a registered gas safety engineer.
All gas safety engineers carry a gas safety card with details of what gas and appliances can work.
Ask your engineer for your security card and check all the details.
On the front of the card there will be a picture of the person in question, an expiration date, which is usually at the end of March each year, you should also see a license number that is removed from the card, c is for people with disabilities. vision
Now that you've checked the front of the map, turn it around, you'll see 2 columns, one for natural gas and another for LPG, that's the one we're interested in.
Let's say you want to install your new kitchen, look at the kitchen map in the LPG section, if you can not see the kitchens, then the engineer is not registered and can not work in your kitchen.
If any of the details of the card are incorrect, you must ask the engineer to leave your property.
One last check you could make is to visit the online gas safety record and check the details of the engineer, this will verify if your engineer is fully registered or not. Prevention is always better than cure.
If it allows the engineer to perform the required work, he will remain open to the pursuit, sanctioned by heavy penalties. The engineer could also be treated and removed from the gas safety file.
Gas bottles or gas cylinder
Most gas suppliers when they deliver their gas usually change their empty bottles for you, but if you need to change a bottle, it's a simple process.
This is where the safety of LPG gas comes in.
First, you must have the correct size wrench to undo the hose attached to the gas cylinder.
Depending on the configuration you have, I advise you to turn everything off before trying to change the bottle; Once isolated, insulate the bottle by closing the valve.
Now, once everything is off, you can start undoing the hose fitting from the bottle.
Change the bottle, tighten the hose and you are ready to start.
The safety of LPG gas must always come first, the gas in the wrong hands is dangerous.
If you have any questions about any of your gas appliances, always insulate it or completely shut off the gas in the bottles and call the experts.
http://www.annonces.immo-reve.com/
https://www.facebook.com/immo.reve.tn
About 80% of households in England are connected to the natural gas supply network, the remaining 20% use oil or LPG to cook and heat their homes.
If you are one of the lucky people living in the countryside, you will know if you want to cook on gas, the only way would be to install LPG.
This normally consists of 2 LPG cylinders, a change in the valve to which the bottles are connected, and a kitchen appliance that has been converted to LPG.
You could even run your LPG central heating system, the settings would be a little different but basically the same.
LPG (Liquefied Petroleum Gas) is like natural gas, the only difference is that it stores the gas in the garden in bottles or in a storage tank.
LPG gas safety is as important as natural gas.
Always inspect and maintain all your gas appliances at least once a year by a registered gas safety engineer.
All gas safety engineers carry a gas safety card with details of what gas and appliances can work.
Ask your engineer for your security card and check all the details.
On the front of the card there will be a picture of the person in question, an expiration date, which is usually at the end of March each year, you should also see a license number that is removed from the card, c is for people with disabilities. vision
Now that you've checked the front of the map, turn it around, you'll see 2 columns, one for natural gas and another for LPG, that's the one we're interested in.
Let's say you want to install your new kitchen, look at the kitchen map in the LPG section, if you can not see the kitchens, then the engineer is not registered and can not work in your kitchen.
If any of the details of the card are incorrect, you must ask the engineer to leave your property.
One last check you could make is to visit the online gas safety record and check the details of the engineer, this will verify if your engineer is fully registered or not. Prevention is always better than cure.
If it allows the engineer to perform the required work, he will remain open to the pursuit, sanctioned by heavy penalties. The engineer could also be treated and removed from the gas safety file.
Gas bottles or gas cylinder
Most gas suppliers when they deliver their gas usually change their empty bottles for you, but if you need to change a bottle, it's a simple process.
This is where the safety of LPG gas comes in.
First, you must have the correct size wrench to undo the hose attached to the gas cylinder.
Depending on the configuration you have, I advise you to turn everything off before trying to change the bottle; Once isolated, insulate the bottle by closing the valve.
Now, once everything is off, you can start undoing the hose fitting from the bottle.
Change the bottle, tighten the hose and you are ready to start.
The safety of LPG gas must always come first, the gas in the wrong hands is dangerous.
If you have any questions about any of your gas appliances, always insulate it or completely shut off the gas in the bottles and call the experts.
http://www.annonces.immo-reve.com/
https://www.facebook.com/immo.reve.tn
5 Reasons Why Swim Spas Make the Best Small Inground Pools
You look at the small pools on the floor? With so many pool options on the market, here are 5 reasons why swimming spas are the perfect choice.
1. EXTREME FUNCTION
Do not let your small size fool you. You can do the same things in this small group as in a large group. In fact, some swim spas offer more versatility than larger pools. This is mainly due to its water flow characteristic. If you choose a pool with a powerful jet of water, you can swim, exercise, do a full body workout, re-educate, relax and have fun without problems. It all depends on how the current is generated: impeller, jets or propeller. Look for pools that offer a powerful and adjustable jet so you can change water at low speeds for easy workouts and rehab at higher speeds for intensive swimming or workout exercises.
Swimming spas come in all shapes and sizes. Make sure you choose the perfect size for your needs. Some welcome one or two people, while others can fit 8-10 comfortably. If you choose a fiberglass group, you can even customize the interior design. Build on benches, stairs, water treadmills and different depths to create your perfect pool.
Once you know your ultimate goal, find a group that fits your needs. Before you know it, you'll be on your way to the small and perfectgroup of land.
2. EASY TO KEEP
Swimming baths are smaller than typical pools, making them much easier to drain for cleaning and maintenance. In addition, some manufacturers offer swimming pools with an easy-to-clean Gelcoat surface that helps minimize algae build-up and creates a barrier against moisture absorption.
Did you know that swim spas emit a minimal chemical odor? Its smaller volume of water means it uses smaller amounts of chemicals that produce less odor. It's great if you want your pool installed indoors. All of this adds up to a group that is easier to maintain and better for the environment.
3. LESS COST OF EXPLOIT
We are all aware of the amount of water we use in our daily lives. The small size of this group means less water and less water, which means lower heating costs and fewer chemicals, saving time and money. Look for insulated swimming spas, such as fiberglass units built with a wooden core. They increase the temperature retention to add even more savings.
Best of all, if you keep your pool covered with a thermal blanket or hard cover, evaporation is minimal, so you do not need to fill it so often. A pool cover also results in minimal humidity and even more heat retention. A win-win everywhere!
4. Design it to complete your home
Many training pools can be ordered to match the decor of your home. Choose mosaics to match your floors, walls, entire room or space in the backyard. Some pool manufacturers, depending on the building material, allow you to choose the color of the pool. Here is an excellent interactive tool for playing with the colors of tiles and pools. Choose a white pool with a blue pool interior. Maybe you would like a striking black or a soothing gray. Just your imagination to create the best oasis of swimming spa.
5. SMALL SWIMMING POOLS ARE EASIER TO INSTALL
Most swim spas take up less space than traditional small pools on the floor. The size of your footprint can be as small as 8 'x 20' or as large as 10'x 22 'to accommodate multiple users. Depending on the building material, install them on the floor or on the surface. Build one on a terrace, place it in the corner of a room, create a solarium in the sunny room or a nice shelter in the backyard.
A smaller group footprint also means less construction. Once the space is ready, it does not take long to install one. If access is a problem, look for groups of towers that can be delivered in sections. This makes it easier to place them in small spaces. Whether you are building a new room or want to put your computer in an existing space, less construction means less money.
http://www.annonces.immo-reve.com/
https://www.facebook.com/immo.reve.tn
1. EXTREME FUNCTION
Do not let your small size fool you. You can do the same things in this small group as in a large group. In fact, some swim spas offer more versatility than larger pools. This is mainly due to its water flow characteristic. If you choose a pool with a powerful jet of water, you can swim, exercise, do a full body workout, re-educate, relax and have fun without problems. It all depends on how the current is generated: impeller, jets or propeller. Look for pools that offer a powerful and adjustable jet so you can change water at low speeds for easy workouts and rehab at higher speeds for intensive swimming or workout exercises.
Swimming spas come in all shapes and sizes. Make sure you choose the perfect size for your needs. Some welcome one or two people, while others can fit 8-10 comfortably. If you choose a fiberglass group, you can even customize the interior design. Build on benches, stairs, water treadmills and different depths to create your perfect pool.
Once you know your ultimate goal, find a group that fits your needs. Before you know it, you'll be on your way to the small and perfectgroup of land.
2. EASY TO KEEP
Swimming baths are smaller than typical pools, making them much easier to drain for cleaning and maintenance. In addition, some manufacturers offer swimming pools with an easy-to-clean Gelcoat surface that helps minimize algae build-up and creates a barrier against moisture absorption.
Did you know that swim spas emit a minimal chemical odor? Its smaller volume of water means it uses smaller amounts of chemicals that produce less odor. It's great if you want your pool installed indoors. All of this adds up to a group that is easier to maintain and better for the environment.
3. LESS COST OF EXPLOIT
We are all aware of the amount of water we use in our daily lives. The small size of this group means less water and less water, which means lower heating costs and fewer chemicals, saving time and money. Look for insulated swimming spas, such as fiberglass units built with a wooden core. They increase the temperature retention to add even more savings.
Best of all, if you keep your pool covered with a thermal blanket or hard cover, evaporation is minimal, so you do not need to fill it so often. A pool cover also results in minimal humidity and even more heat retention. A win-win everywhere!
4. Design it to complete your home
Many training pools can be ordered to match the decor of your home. Choose mosaics to match your floors, walls, entire room or space in the backyard. Some pool manufacturers, depending on the building material, allow you to choose the color of the pool. Here is an excellent interactive tool for playing with the colors of tiles and pools. Choose a white pool with a blue pool interior. Maybe you would like a striking black or a soothing gray. Just your imagination to create the best oasis of swimming spa.
5. SMALL SWIMMING POOLS ARE EASIER TO INSTALL
Most swim spas take up less space than traditional small pools on the floor. The size of your footprint can be as small as 8 'x 20' or as large as 10'x 22 'to accommodate multiple users. Depending on the building material, install them on the floor or on the surface. Build one on a terrace, place it in the corner of a room, create a solarium in the sunny room or a nice shelter in the backyard.
A smaller group footprint also means less construction. Once the space is ready, it does not take long to install one. If access is a problem, look for groups of towers that can be delivered in sections. This makes it easier to place them in small spaces. Whether you are building a new room or want to put your computer in an existing space, less construction means less money.
http://www.annonces.immo-reve.com/
https://www.facebook.com/immo.reve.tn
5 Important Safety Tips for Generators
Generators
come in many forms, such as industrial diesel generators and portable
inverter camping generators, but all provide a stable source of energy
for our homes, businesses, industries and other necessities. A generator allows continuity of operations in the event of a failure of the main power connection. They are also widely used in areas with unreliable or non-existent connectivity. Generators are important to ensure that our quality of life is
maintained, and the machine is used by everyone, from regular owners to
disaster relief organizations.
Since widespread electrification has introduced the world into the wonders of electricity, people have increasingly relied on advanced machines and electronics to improve their standard of living. The devices also made life at home safer and more convenient. Freezers and refrigerators have extended shelf life beyond what was possible only a century ago. The heaters and the air conditioners kept us at ease despite the extreme heat and cold. Air traffic systems have enabled hundreds of millions of people to travel quickly and safely. These are just some of the machines and systems that improve our daily lives and depend on electricity to function.
All this power carries great responsibility on the part of the user. It is essential that operators follow strict safety measures and guidelines to ensure a safe and consistent flow of energy. Whether at home, at work or off camp, you should read and understand these simple rules to keep everyone safe and comfortable.
1. Read the manual
All operators should read the attached user manual and safety documentation before taking the generator online. Anyone who has not read the required hardware can not operate the generator.
The manual contains everything you need to know about the generator: technical specifications, operating instructions, safety precautions and limitations. This is for the benefit of the operator. Similarly, the operator must also understand and pay attention to all warning labels.
2. Understand your needs
The generators vary in size and rated power. Some generators produce less energy than others. When using a generator, always note all peripherals and devices that will be powered by the generator. This is essential because the generator could overload and disconnect, or worse, explode.
On the contrary, you could have a generator that produces too much power for your needs. Standard generators have a constant output that can not be changed. If it consumes only 10% of the generator's rated power, it still pays the remaining 90%.
3. Keep it dry
One of the most important things the operator must do is keep the generator dry. The generator should be located away from possible moisture sources. Also, the generator should not be used outdoors and the weather conditions are wet or rainy.
Ideally, the generator should be protected by a tent or awning. If the generator is on-line, do not attempt to activate appliances and appliances exposed to moisture.
Electricity and water do not mix well. Moisture can damage the generator and devices, or worse, electrocute people near the device.
4. Ensure adequate ventilation.
Do not use generators inside or inside. Generating sets emit gases that contain amounts of carbon monoxide, an invisible and odorless gas that is fatal in large quantities. Gas, if left to collect, can quickly kill a person.
If the generator is outdoors, it must be located away from interior entrances such as vents, windows and doors. Carbon monoxide has no aroma, which resulted in the name "silent killer". Anyone who feels stunned near a generator must leave immediately and inform the operator.
5. Correct reappropriation
Finally, the generator must refuel if the operation has to be extended. The generator must not be recharged if it is in line or is still hot if it is off. The machine must be cooled by itself before it can be recharged. Diesel or gasoline could ignite if it comes in contact with the hot generator.
http://www.annonces.immo-reve.com/
https://www.facebook.com/immo.reve.tn
Since widespread electrification has introduced the world into the wonders of electricity, people have increasingly relied on advanced machines and electronics to improve their standard of living. The devices also made life at home safer and more convenient. Freezers and refrigerators have extended shelf life beyond what was possible only a century ago. The heaters and the air conditioners kept us at ease despite the extreme heat and cold. Air traffic systems have enabled hundreds of millions of people to travel quickly and safely. These are just some of the machines and systems that improve our daily lives and depend on electricity to function.
All this power carries great responsibility on the part of the user. It is essential that operators follow strict safety measures and guidelines to ensure a safe and consistent flow of energy. Whether at home, at work or off camp, you should read and understand these simple rules to keep everyone safe and comfortable.
1. Read the manual
All operators should read the attached user manual and safety documentation before taking the generator online. Anyone who has not read the required hardware can not operate the generator.
The manual contains everything you need to know about the generator: technical specifications, operating instructions, safety precautions and limitations. This is for the benefit of the operator. Similarly, the operator must also understand and pay attention to all warning labels.
2. Understand your needs
The generators vary in size and rated power. Some generators produce less energy than others. When using a generator, always note all peripherals and devices that will be powered by the generator. This is essential because the generator could overload and disconnect, or worse, explode.
On the contrary, you could have a generator that produces too much power for your needs. Standard generators have a constant output that can not be changed. If it consumes only 10% of the generator's rated power, it still pays the remaining 90%.
3. Keep it dry
One of the most important things the operator must do is keep the generator dry. The generator should be located away from possible moisture sources. Also, the generator should not be used outdoors and the weather conditions are wet or rainy.
Ideally, the generator should be protected by a tent or awning. If the generator is on-line, do not attempt to activate appliances and appliances exposed to moisture.
Electricity and water do not mix well. Moisture can damage the generator and devices, or worse, electrocute people near the device.
4. Ensure adequate ventilation.
Do not use generators inside or inside. Generating sets emit gases that contain amounts of carbon monoxide, an invisible and odorless gas that is fatal in large quantities. Gas, if left to collect, can quickly kill a person.
If the generator is outdoors, it must be located away from interior entrances such as vents, windows and doors. Carbon monoxide has no aroma, which resulted in the name "silent killer". Anyone who feels stunned near a generator must leave immediately and inform the operator.
5. Correct reappropriation
Finally, the generator must refuel if the operation has to be extended. The generator must not be recharged if it is in line or is still hot if it is off. The machine must be cooled by itself before it can be recharged. Diesel or gasoline could ignite if it comes in contact with the hot generator.
http://www.annonces.immo-reve.com/
https://www.facebook.com/immo.reve.tn
Discolored Sink Water and the Causes
On occasion, the sink water from the cold water tap kitchen is yellow. This is my favorite resource, Google! Here are some common causes of discolored water.
If you have yellow, red or orange water (like me), it has rust in the water. The color change depends on the oxidation of the oxide. Oxidation in water will not cause health problems.
Oxidized water can come from city or water pipes in your home. If your problem only arises when using cold water (again, like me), if the color change is sudden or the color is faded in all the taps, water of the city. Cities usually do an annual water wash to remove sediment, so the problem can go away by itself. However, if it is low in your area, the discolored water may continue.
While discolored water is not a health threat can not be discolored clothing. If you have a rusty color on clothing, do not use bleach. The chemical reaction causes the permanent spot. All you need to do is wash the clothes again.
If water is discolored every morning, occurs in a tap fading or discoloration is in its hot water, the problem is plumbing in your home. If the problem is in your home, you should replace the rusted hoses. If you have galvanized pipes and choose to replace the corroded copper pipes, make sure you connect properly. If directly connected, copper can cause galvanized pipes to rust faster.
If the water is bluish green, it is a problem with copper or brass. If you have this color in your water can cause health problems and need to be treated immediately. Large amounts of copper in the water can cause gastrointestinal, renal and / or liver problems.
If your water is:
BLACK: This could be a mold problem and should call a plumber to investigate.
ROSE: A harmless organism is growing in your water. No cause of health problems.
BLUE: The disinfectant of the toilet tank has become a leak and is mixed with water. Call a plumber to repair the leak.
GREEN: Algae are growing in your water supply.
http://www.annonces.immo-reve.com/
https://www.facebook.com/immo.reve.tn
If you have yellow, red or orange water (like me), it has rust in the water. The color change depends on the oxidation of the oxide. Oxidation in water will not cause health problems.
Oxidized water can come from city or water pipes in your home. If your problem only arises when using cold water (again, like me), if the color change is sudden or the color is faded in all the taps, water of the city. Cities usually do an annual water wash to remove sediment, so the problem can go away by itself. However, if it is low in your area, the discolored water may continue.
While discolored water is not a health threat can not be discolored clothing. If you have a rusty color on clothing, do not use bleach. The chemical reaction causes the permanent spot. All you need to do is wash the clothes again.
If water is discolored every morning, occurs in a tap fading or discoloration is in its hot water, the problem is plumbing in your home. If the problem is in your home, you should replace the rusted hoses. If you have galvanized pipes and choose to replace the corroded copper pipes, make sure you connect properly. If directly connected, copper can cause galvanized pipes to rust faster.
If the water is bluish green, it is a problem with copper or brass. If you have this color in your water can cause health problems and need to be treated immediately. Large amounts of copper in the water can cause gastrointestinal, renal and / or liver problems.
If your water is:
BLACK: This could be a mold problem and should call a plumber to investigate.
ROSE: A harmless organism is growing in your water. No cause of health problems.
BLUE: The disinfectant of the toilet tank has become a leak and is mixed with water. Call a plumber to repair the leak.
GREEN: Algae are growing in your water supply.
http://www.annonces.immo-reve.com/
https://www.facebook.com/immo.reve.tn
Take Advantage of the Solar Tax Credit Before It's Gone
Going
to solar energy reports in the long run, but many homeowners and
business owners are reluctant to make the change because of the initial
cost of the purchase and installation. But unless you plan to lease your photovoltaic system, there is no better time than the present to invest in solar energy. Although solar energy is increasingly affordable due to lower capital
costs, solar energy market players only have a few years to take
advantage of the federal government's significant tax incentives.
The federal solar energy tax credit applies to a range of solar technologies, including solar water heating systems, solar heat, solar thermal, solar thermal heat and photovoltaic. Also known as the Investment Tax Credit (ITC), the federal solar credit was designed to encourage the solar installation by deducting a portion of the cost of your federal income taxes. If you receive non-taxable incentives from your local supplier, the deduction would apply to the cost of installation less the rebate or any other subsidized energy funding program.
To qualify for the federal residential renewable energy tax credit, homeowners must own, not rent, their solar panels. You are eligible even if the system is in a second home, as long as you own the property and live there for part of the year. If you owe the federal government less than 30% of the cost of your system, you can claim the remaining credit for the following year.
The federal solar credit was due to expire in 2007 before Congress does not extend the measure by the end of 2015. The solar users can now deduct 30% of the cost of their solar photovoltaic system by the end of 2019, the owner average more than $ 5,000 in their federal taxes. By 2020, new solar users will only be able to deduct 26% of their system costs and 22% by 2021. After 2022, only commercial solar systems will be eligible for the solar tax credit at 10% of the cost of the system. system. However, homeowners will be able to claim the solar tax credit provided their system is operational by the end of 2023.
Given that solar energy is now cheaper than fossil fuels and generally pays for itself within six to eight years, the Solar Energy Tax Credit is an opportunity to save in the short and long term . The law even allows you to claim the tax credit as soon as you start building your system, whereas in the past, owners of new solar energy systems could only claim the federal tax credit when their system was in place. operational. In today's solar landscape, it is worth going to the lot as soon as possible, a gain for the environment and your bank account.
http://www.annonces.immo-reve.com/
https://www.facebook.com/immo.reve.tn
The federal solar energy tax credit applies to a range of solar technologies, including solar water heating systems, solar heat, solar thermal, solar thermal heat and photovoltaic. Also known as the Investment Tax Credit (ITC), the federal solar credit was designed to encourage the solar installation by deducting a portion of the cost of your federal income taxes. If you receive non-taxable incentives from your local supplier, the deduction would apply to the cost of installation less the rebate or any other subsidized energy funding program.
To qualify for the federal residential renewable energy tax credit, homeowners must own, not rent, their solar panels. You are eligible even if the system is in a second home, as long as you own the property and live there for part of the year. If you owe the federal government less than 30% of the cost of your system, you can claim the remaining credit for the following year.
The federal solar credit was due to expire in 2007 before Congress does not extend the measure by the end of 2015. The solar users can now deduct 30% of the cost of their solar photovoltaic system by the end of 2019, the owner average more than $ 5,000 in their federal taxes. By 2020, new solar users will only be able to deduct 26% of their system costs and 22% by 2021. After 2022, only commercial solar systems will be eligible for the solar tax credit at 10% of the cost of the system. system. However, homeowners will be able to claim the solar tax credit provided their system is operational by the end of 2023.
Given that solar energy is now cheaper than fossil fuels and generally pays for itself within six to eight years, the Solar Energy Tax Credit is an opportunity to save in the short and long term . The law even allows you to claim the tax credit as soon as you start building your system, whereas in the past, owners of new solar energy systems could only claim the federal tax credit when their system was in place. operational. In today's solar landscape, it is worth going to the lot as soon as possible, a gain for the environment and your bank account.
http://www.annonces.immo-reve.com/
https://www.facebook.com/immo.reve.tn
The Various Problems of A Crawlspace Foundation
The most common problems with the foundation of crawlspace is moisture and moisture in the first place. You will notice that if one is not enough and properly ventilated
space slowly crawl, and if the area is built to contain a lot of
moisture than expected, then humidity has crawling its way from very
high chances in the sanitary space.
These types of hazards can lead to a rotten texture on the wooden floor of the crawl space. This moisture is also capable of leading to things like mold and mildew in your crawl space.
Such problems are really a threat and a solution is very necessary to avoid being a victim of such problems.
Here are some repair tips for the following basic problems:
• WOOD ROTATION
Wood rot is essentially the progressive deterioration of wood caused by one or more pieces of fungus. The mushroom does the job of swallowing the different parts of the wood that give the wood a certain type of strength and rigidity. This is one of the most unfortunate effects of bad space and leads to serious damage to the wood present in the house.
• DAMAGE TO THE PATH
If it is not known by many, then first know that the floor radius of the word "crawl space" has a very large role to play in building the house. A poorly resistant and considerably weak and severely damaged or overwhelmed ground beam can be classified as requiring many types of repairs. However, there is a solution to this problem of the crack bundle which consists in first understanding the exact type of problem that the floor is facing. This will give you the advantage and you will discover the right problem for the solution to take place.
• BEAM DAMAGE
A beam may have a rotting wood or some type of termite damage. In any event, there is a solution to these problems. In the worst case, the beams must be replaced. This is said to be a very serious and dangerous process as well and you should always make sure that the people you hire to do the replacement work should be great professionals. It should be clearly understood that the replacement beam should be the same size as the previous beam and should also have additional pillars or columns to support the beam.
• INACCESSIBILITY OF THE SYSTEM
There are some houses where the trailing space is too narrow and too small to crawl. It should measure a minimum of 18 inches of play properly distributed between the bottom of the floor joists and the floor of the dirt. This should be maintained because if the measurement of trawl space is not optimal, this can lead to wood rot, which is one of the most tedious problems of a trawling foundation.
http://www.annonces.immo-reve.com/
https://www.facebook.com/immo.reve.tn
These types of hazards can lead to a rotten texture on the wooden floor of the crawl space. This moisture is also capable of leading to things like mold and mildew in your crawl space.
Such problems are really a threat and a solution is very necessary to avoid being a victim of such problems.
Here are some repair tips for the following basic problems:
• WOOD ROTATION
Wood rot is essentially the progressive deterioration of wood caused by one or more pieces of fungus. The mushroom does the job of swallowing the different parts of the wood that give the wood a certain type of strength and rigidity. This is one of the most unfortunate effects of bad space and leads to serious damage to the wood present in the house.
• DAMAGE TO THE PATH
If it is not known by many, then first know that the floor radius of the word "crawl space" has a very large role to play in building the house. A poorly resistant and considerably weak and severely damaged or overwhelmed ground beam can be classified as requiring many types of repairs. However, there is a solution to this problem of the crack bundle which consists in first understanding the exact type of problem that the floor is facing. This will give you the advantage and you will discover the right problem for the solution to take place.
• BEAM DAMAGE
A beam may have a rotting wood or some type of termite damage. In any event, there is a solution to these problems. In the worst case, the beams must be replaced. This is said to be a very serious and dangerous process as well and you should always make sure that the people you hire to do the replacement work should be great professionals. It should be clearly understood that the replacement beam should be the same size as the previous beam and should also have additional pillars or columns to support the beam.
• INACCESSIBILITY OF THE SYSTEM
There are some houses where the trailing space is too narrow and too small to crawl. It should measure a minimum of 18 inches of play properly distributed between the bottom of the floor joists and the floor of the dirt. This should be maintained because if the measurement of trawl space is not optimal, this can lead to wood rot, which is one of the most tedious problems of a trawling foundation.
http://www.annonces.immo-reve.com/
https://www.facebook.com/immo.reve.tn
Some Useful Interior Design Ideas for Your Home
You need interior design ideas to give the room a unique personality and spirit. Such ideas can add life and color to spaces and help create a stimulating environment. However,
homeowners must first evaluate their needs and then choose and apply
these ideas to create the desired variety of visual difference at every
corner of the home. Do not plan ahead means your interior can not get the beauty and style you expect.
Here are some really useful interior design ideas for your home -
First, you have to decide if the focus is on aesthetics or functionality in the room and then you have to go ahead with the selection of ideas.
In the same way, the part must be designed in such a way as to transmit perfectly its disposition and its sensitivity.
All colors, patterns and furniture should reflect the personality so that the interior seems designed according to the tastes of the owners.
When deciding and designing the room, you must choose a theme that expresses your personality in a true sense and gives the decor a distinct personal touch.
You can choose from a variety of themes, such as classic, contemporary and ethnic, to get an interior that invokes good grades and moods.
The addition of any type of art, such as a painting, wallpaper or period furniture, can help give the piece an authentic touch.
Wooden accessories and glass items are other options to give a touch of elegance and kingship to the interior decoration.
The curtains and fabrics of the room must blend perfectly into the room, things may seem asymmetrical.
It's a great idea to decorate the room with pretty shades of paint as the shadow can create the desired level of visual sparks for space.
The colors chosen for the interior must correspond aesthetically and perfectly to the theme of the room to create a visual resonance.
Giving inside a touch of nature is a sensible idea and for this you can use green carpets and more metal on furniture and other accessories.
Stay away from choosing any color or fabric that is more towards the garish side that cause soothing feeling, as this can ruin the entire design effect.
Get tailored furniture so that the spaces seem well planned and well managed in addition to leaving the beautiful designs to make the interior pretty.
Look for nested furniture and built-in storage so that nothing seems scattered and scattered everywhere, as the clutter can have a negative visual impact on the decor.
Use upholstery in plain colors and crisp fabrics to transform the appearance of spaces to a higher level.
Do not try to replace or refurbish the furniture and instead choose the color of the wall that corresponds to that of the furniture or that blends perfectly with the environment.
And finally, always look for a spacious room without too much pushing too much.
http://www.annonces.immo-reve.com/
https://www.facebook.com/immo.reve.tn
Here are some really useful interior design ideas for your home -
First, you have to decide if the focus is on aesthetics or functionality in the room and then you have to go ahead with the selection of ideas.
In the same way, the part must be designed in such a way as to transmit perfectly its disposition and its sensitivity.
All colors, patterns and furniture should reflect the personality so that the interior seems designed according to the tastes of the owners.
When deciding and designing the room, you must choose a theme that expresses your personality in a true sense and gives the decor a distinct personal touch.
You can choose from a variety of themes, such as classic, contemporary and ethnic, to get an interior that invokes good grades and moods.
The addition of any type of art, such as a painting, wallpaper or period furniture, can help give the piece an authentic touch.
Wooden accessories and glass items are other options to give a touch of elegance and kingship to the interior decoration.
The curtains and fabrics of the room must blend perfectly into the room, things may seem asymmetrical.
It's a great idea to decorate the room with pretty shades of paint as the shadow can create the desired level of visual sparks for space.
The colors chosen for the interior must correspond aesthetically and perfectly to the theme of the room to create a visual resonance.
Giving inside a touch of nature is a sensible idea and for this you can use green carpets and more metal on furniture and other accessories.
Stay away from choosing any color or fabric that is more towards the garish side that cause soothing feeling, as this can ruin the entire design effect.
Get tailored furniture so that the spaces seem well planned and well managed in addition to leaving the beautiful designs to make the interior pretty.
Look for nested furniture and built-in storage so that nothing seems scattered and scattered everywhere, as the clutter can have a negative visual impact on the decor.
Use upholstery in plain colors and crisp fabrics to transform the appearance of spaces to a higher level.
Do not try to replace or refurbish the furniture and instead choose the color of the wall that corresponds to that of the furniture or that blends perfectly with the environment.
And finally, always look for a spacious room without too much pushing too much.
http://www.annonces.immo-reve.com/
https://www.facebook.com/immo.reve.tn
Inscription à :
Articles (Atom)