Safety Rules for a Woodwork Workshop

Working in a workshop exposes one to many dangers, especially the many nails, screws, cutting equipment, heavy materials and drilling equipment.
It is important at a carpentry workshop to exercise caution and care. This will help ensure that no injuries occur when the store is in use.
Safety following the rules any beginner who wants to start a carpentry workshop need to know is presented.
Always use safety equipment
When you work in a shop, you get to punch holes, materials, nails, screws to use and even a place cut ferry materials to another. In performing these tasks, you get to expose their eyes, ears, hands and even the unruly elements of the body that can cause damage.
For example, you can drill holes in a piece of wood to screw the two pieces together. Meanwhile, small pieces of wood or dust will fly in all directions. If your eyes are not protected by safety glasses, you will suffer an injury. Before starting work on his new studio, it is necessary to invest in safety glasses, protective gloves (optional), coveralls and a dust mask listening too.
Avoid alcohol and drugs
Alcohol and drugs affect the part of the human brain that can think logically and act normally. When these substances that poison the body does not just act as they should in a normal situation are consumed. If you use heavy machinery such as drilling equipment or cutting equipment, accidents are inevitable.
Although it may seem harmless to open a beer bottle while on a project, should be avoided until you are out of the workshop. You must have a clear mind sober announcement when using machines in particular power tools.
Always turn off the power after the use of a tool
Power tools are very useful because they help to cut and drill holes very easily. There are times when you need to change the bit or blades. Meanwhile, you make sure that the power-tool both your switch and the power source. This will ensure that no energy flowing through it and if accidentally turned on, no injury will occur.
If this were to happen that could harm your body or even lose fingers.
Do not put your hands away from moving blades
There are times when you will use a very professional team as table saws and miter saws to cut various materials. In doing so, the only thing to remember is that you never put your hands anywhere near the blade. This can happen when trying to eliminate waste or thresholds.
What you need to do is wait for the blade to completely stop the movement and can then eliminate waste and thresholds. You must use a piece of scrap or push stick to move the waste and not with bare hands. Accidents happen and you can spend on the machine using their blows legs on it. Always be careful.
dress appropriately
When you work in a shop, remember that loose clothing to get caught in a saw blade and does not know what will happen next. You need to wear clothes that are comfortable for you and the environment being developed. Clothing should also be able to protect your body from whimsical pieces of wood and dust that are the result of cutting and drilling. The best clothing to ensure you get are protected combinations can be purchased in a store near you. Finally, avoid necklaces and bracelets on her neck and wrists.
You can find templates online and try making tools available. A workshop is not an area where neglect is tolerated, but a place to rest and take good security measures. In our series, the second part of the security rules for a carpentry workshop, you get to learn about what to do in his studio to prevent injuries.
Use blades and pointed tips
When drilling holes and cutting material, you must ensure that the saws and drills are equipped with blades and sharp pieces. Using tools pierced with dull blades and pieces will work the most difficult and dangerous too. Much effort will have to use to get a job. This will lead to a rear setback that can lead to hand injuries. To ensure that the work is done more quickly; you need to invest in blades and sharp pieces. It will reduce materials and drilling of wells without experiencing back kick to the strength of the team.
Always minimize distractions
Working in a studio is like driving a car, truck or train. The driver must enter the 100% concentration on the road and traffic and pedestrians oncoming. In a workshop, avoid distractions that the use of equipment with blades and sharp pieces. There are several things that can distract you when you are in a studio. For example, you bought a small LED TV to watch games as Manchester lives too far from the city. Although it is a great thing to support your team and be a fan, turn off the TV when you are working. You can choose to listen to your favorite playlist and while working. It's less boring and motivate you to finish your work.
Keep children away from the workshop
When you invest in your shop at home, you need to keep children away from the cutting and drilling. These are power tools that have blades and sharp pieces. If accidentally activated, they injure a person when handled properly.
Kids love to run and hide in different areas of the house and his workshop is one of them. One way to keep children out of investing in locks. You can use the traditional bolt locks with a padlock or you can use that come with a modern electronic keyboard. All you need to do is set your password and can block unauthorized users.
Use only extension cords
Power is distributed to homes using electric copper son who are able to transmit a certain amount of energy. At home, you will find power outlets in different parts of the house. Regarding extensions, you must use in his studio. His workshop is a home to various power tools tools drill saws. Fixing of power cables in one take not only the extension and the output is overloaded, it will be difficult for you to know which tool has been disconnected and that is. With one extension, you will be able to put into the socket, allowing you to replace dull blades, dull locks and remove debris near the blades.
Always work against the strawberry
Most power tools for woodworking are constructed so that the direction of a piece of wood moves through it. This simply means that you must move against the opposite direction of the cutting head. Since this is the safest practice, you must ensure that cutting and router bits of leaves against the motion of matter rather than going with it.

http://www.annonces.immo-reve.com/
https://www.facebook.com/immo.reve.tn